Industrial Solvents

We offer a wide range of acetone that is found naturally in plants, trees, volcanic gases, forest fires and as a product of breakdown of body fat. Apart from this it is also present in vehicle exhaust, tobacco smoke and landfill sites. This is colorless liquid and has a distinct taste and smell. It is widely used in making plastic, fibers, drugs and other chemicals.

 

Technical Specifications:

 

• Cas No.: 67-64-1
• Molecular formula : C3H6O
• Molar mass : 58.08 g mol¿1
• Appearance : Colorless liquid
• Density :0.79 g/cm3
• Melting point :¿94.9 °C, 178 K, -139 °F
• Boiling point :56.53 °C, 330 K, 134 °F
• Solubility in water miscible
• Acidity (pKa) : 24.2
• Refractive index (nD) :1.359 (20 °C)
• Viscosity :0.32 cP (20 °C)

We also offer acetic acid that is widely used in textile and food industry. Acetic acid is a clear liquid that has a pungent odor. It is free from water and is highly corrosive in nature. In addition, it is formulated and tested in adherence with international standards.

 

Technical Specifications:

 

• CAS number: [64-19-7]
• Pub Chem : 176
• Molecular formula: C2H4O2
• Molar mass: 60.05 g mol1
• Appearance: Colorless liquid or crystals
• Density: 1.049 g/cm3 (l)
• 1.266: g/cm3 (s)
• Melting point: 16.5 °C, 290 K, 62 °F
• Boiling point: 118.1 °C, 391 K, 245 °F
• Solubility in water and fully miscible
• Acidity (pKa): 4.76 at 25 °C
• Viscosity: 1.22 mPa·s at 25 °C

We provide benzene that is a colorless & flammable liquid with a sweet smell and a relatively high melting point. It is an important industrial solvent and precursor in the production of drugs, plastics, synthetic rubber and dyes. Benzene is also used to make different types of rubbers, lubricants, dyes, detergents, drugs, explosives and pesticides.

 

Technical Specifications:

 

• CAS number: 71-43-2
• Molecular formula: C6H6
• Molar mass: 78.11 g mol¿1
• Appearance: Colorless liquid
• Density: 0.86 g/cm3
• Meltit:ng poin 5.5 °C, 279 K, 42 °F
• Boiling point: 80.1 °C, 353 K, 176 °F
• Solubility in water: 0.8 g/L (25 °C)
• Viscosity: 0.652 CP at 20 °C
• Dipole moment: 0 D

We supply toluene that is a clear and water-insoluble liquid and has a typical smell of paint thinners. It is a common solvent, and can dissolve in paints, paint thinners, many chemical reactants, rubbers, printing inks, adhesives (glues), lacquers, leather tanners and disinfectants.

 

Technical Specifications:

 

• CAS number: 108-88-3
• Molecular formula: C7H8 (C6H5CH3)
• Molar mass: 92.14 g/mol
• Appearance: colorless liquid
• Density: 0.8669 g/ML
• Melting point: 93 °C
• Boiling point: 110.6 °C
• Solubility in water 0.47 g/l (20¿25°C)
• Viscosity: 0.590 CP at 20°C

 

We offer a wide range of Mono Ethylene Glycol (M.E.G) that is miscible with water in all proportions. It is widely used in the production of antifreeze, coolants, aircraft, anticancer and deicers & solvents. Apart from this it is also used in the manufacturing of polyester (PET) resins, films and fibers.

 

Technical Specifications:

 

• CAS number: 107-21-1
• Molecular formula: C2H4 (OH) 2
• Molar mass: 62.068 g/mol
• Density: 1.1132 g/cm³
• Melting point: 12.9 °C (260 K)
• Boiling point: 197.3 °C (470 K)
• Solubility in water: Miscible with water in all proportions
• Viscosity: 1.61 × 10¿2 N*s / m2 [1]

 

We also offer Diethylene Glycol (D.E.G) that exhibits high water solubility and reactivity with many organic compounds. It is colorless, odorless stable liquid with low viscosity, sweet taste and high boiling points.

 

Technical Specifications:

 

• CAS number: 111-46-6
• Molecular formula: C4H10O3
• Molar mass: 106.12 g/mol
• Appearance: Colorless liquid
• Density: 1.118 g/ ML
• Melting point:-10.45 °C
• Boiling point: 244-245 °C
• Solubility in water: miscible

We offer Tri Ethylene Glycol (T.E.G.) that is a colourless, odourless and stable liquid that has low viscosity and a high boiling point. It is used as a plasticizer for vinyl and can also be used in air-sanitizer products.

 

Technical Specifications:

 

• CAS number: 112-27-6
• Molecular formula: C6H14O4
• Molar mass: 150.17 g mol¿1
• Appearance: Colourless liquid
• Density: 1.1 g/ML
• Melting point: -7oC
• Boiling point: 285oC

We offer Isopropyl alcohol that is a colorless, flammable chemical compound with a strong odor. It has the molecular formula C3H8O and is the simplest example of a secondary alcohol, where the alcohol carbon is attached to other two carbons.
 
The chemical is the result of a combination of water and propylene. There are two processes for achieving this:

• Indirect hydration via the sulfuric acid process
• Direct  hydration.

The chemical is cheaply available, dries quickly and relatively non toxic. It is also used as a solvent in cleaning liquid. It is also used by many music shops to give second-hand or worn records newer looking sheens. It cleans white boards very well and other unwanted ink related marks. Isopropyl alcohol also effectively removes:

• Smudges
• Dirt
• Fingerprints from cell phones

  It is also effective at removing residual glue from sticky labels.

We offer a diverse range of Di-Ethyl-Phthalate that is clear oily mobile liquid. It is odourless, colorless and can be stored in a cool, ventilated area away from flame. It is recommended to wear safety goggles, rubber gloves, apron and overalls while handling the material.

The chemical is supplied in ISO containers.

• Color, APHA :Max. 30
• Purity as Ester Content
• Wt% : Max. 0.02 Moisture
•  Wt.% : Max. 0.2
• Specific Gravity @ 25°C: 1.09 - 1.15
• Viscosity @ 25°C: 8 - 12
• Refractive Index @ 25°C: 1.500 - 1.505